Equiso Forum - Discussion Forums for the Equiso Smart TV

Full Version: Equiso Pro Stock ROM --Flash back to Stock from bad OTA update/bugs
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
Here's the Equiso Stock recovery file to roll back to stock if you bricked your Pro unit from the OTA or if your wanting to go back to the stock build.

1) Download the files from the link provided below (Rom & Flashing Utility)
2) Run a MD5 checksum to make sure you have no corruption in the file.
* Download fsum from http://www.slavasoft.com/fsum/
* Extract fsum.exe to the folder where the zip file is located
* DOS Prompt- Run: fsum Equiso_Pro_Stock-2013-03-26.zip
* Check sum should match what is below. If not you have a corrupt download.
* Also, as added precaution I've included the individual file checksum in the zip. You can compare that after extracting the file (md5sum.txt)
3) Unzip Flashing Utility--2013-04-12.zip
4) Follow HowTo-Burn Image.png from zip
5) Remove SDCard from PC and power on Equiso
6) When Equiso is booted up plug in MicroSD Card

7) Drink lots of beer and wait as the process is fairly long.
8) When Equiso is done flashing and its rebooting after update pop the microSD card out.
9) Buy some more beer and send it to me. Smile
10) If you brick your device blame yourself not me. Im just relaying the info. Use at your own risk.

==MD5 CheckSum==
311b4d697bb521ecdf9d58b723637020 *Equiso_Pro_Stock-2013-03-26.zip
15bfebbc1033b75f251549489d091ee2 *Flashing Utility--2013-04-12.zip

c0114dd0445b7e28fc2934b767365840 *partition_config
398766593587359df0d33608e8dc8490 *product_config.txt
2de9cdb6848d2c24d2f663bc56f85d72 *TF.ROM
756679e159132bc9073101a30d80c952 *uImage_tf



==File Shares==
File name: Equiso_Pro_Stock-2013-03-26.zip (186MB)

File name: Equiso_Pro_Stock-2013-03-26.zip (186MB)

Flashing Utility--2013-04-12.zip (21MB)

==Flashing Utility- HowTo==
[Image: 2w4z6lt.jpg]
(26-03-2013 08:38 PM)blkcamarozr28 Wrote: [ -> ]Here's the Equiso Stock recovery file to roll back to stock if you bricked your Pro unit from the OTA or if your wanting to go back to the stock build.

1) Download the files from the link provided below
2) Run a MD5 checksum to make sure you have no corruption in the file.
* Download fsum from http://www.slavasoft.com/fsum/
* Extract fsum.exe to the folder where the zip file is located
* DOS Prompt- Run: fsum Equiso Pro Stock.zip
* Check sum should match what is below. If not you have a corrupt download.
3) Extract all contents from zip file to root directory of your FAT32 formatted micro sdcard.
4) Insert micro sdcard then power on device.
5) Drink lots of beer and wait as the process is fairly long.
6) If you brick your device blame yourself not me. Im just relaying the info. Use at your own risk.

==MD5 CheckSum==
bbad8bbb63c16e33df2a6ebcf42e0c20 *Equiso Pro Stock.zip

==FileDropper Share==
File name: Equiso Pro Stock.zip File size: 492.92 MB

Nice job, as usual Smile

Thanks a lot
Please download the latest files I've uploaded.
Compressed them a lot so save on the download. Started at 492MB, now its at 186MB. Enjoy! Big Grin
I discovered another NS115 based TV stick, Egreat H5, which has a great looking Android customized version.

Is there a chance you could find a download link for that as well?
I skipped all steps only did this " 5) Drink lots of beer and wait as the process is fairly long."


hahahaha
(27-03-2013 08:14 PM)Niko Wrote: [ -> ]I skipped all steps only did this " 5) Drink lots of beer and wait as the process is fairly long."


hahahaha
Niko - Step 5 is the saving grace! If any of the other steps fails just repeat Step 5. Big Grin
I have copied all 4 files to a FAT32 formatted MicroSD cards, inserted the card in the TF slot and powered on Equiso... nothing happens... it either shows a black screen or the Equiso logo and it hangs there...

I have tried multiple MicroSD cards...

Also tried the T21 ROM and the same...

Any idea why flashing may not work?

All the MicroSD cards are recognized by Equiso...

Perhaps the allocation size could make a difference? Anything else could be the problem?
(26-03-2013 08:38 PM)blkcamarozr28 Wrote: [ -> ]Here's the Equiso Stock recovery file to roll back to stock if you bricked your Pro unit from the OTA or if your wanting to go back to the stock build.

1) Download the files from the link provided below
2) Run a MD5 checksum to make sure you have no corruption in the file.
* Download fsum from http://www.slavasoft.com/fsum/
* Extract fsum.exe to the folder where the zip file is located
* DOS Prompt- Run: fsum Equiso_Pro_Stock-2013-03-26.zip
* Check sum should match what is below. If not you have a corrupt download.
* Also, as added precaution I've included the individual file checksum in the zip. You can compare that after extracting the file (md5sum.txt)
3) Extract all contents from zip file to root directory of your FAT32 formatted micro sdcard.
4) Insert micro sdcard then power on device.
5) Drink lots of beer and wait as the process is fairly long.
6) If you brick your device blame yourself not me. Im just relaying the info. Use at your own risk.

==MD5 CheckSum==
311b4d697bb521ecdf9d58b723637020 *Equiso_Pro_Stock-2013-03-26.zip

c0114dd0445b7e28fc2934b767365840 *partition_config
398766593587359df0d33608e8dc8490 *product_config.txt
2de9cdb6848d2c24d2f663bc56f85d72 *TF.ROM
756679e159132bc9073101a30d80c952 *uImage_tf

==File Shares==
File name: Equiso_Pro_Stock-2013-03-26.zip (186MB)

File name: Equiso_Pro_Stock-2013-03-26.zip (186MB)

What should we see on the screen during update? Equiso logo? Black screen? A progress bar of some kind?

I followed your guide and I let my device on for hours and nothing happened... Depending on the sdcard sometimes a black screen is shown other times the equiso logo but nothing happens... When I reboot my device is still bricked ...
(30-03-2013 11:40 PM)cutare Wrote: [ -> ]Same issue here, equiso boots up normally, no update takes place.
(26-03-2013 08:38 PM)blkcamarozr28 Wrote: [ -> ]Here's the Equiso Stock recovery file to roll back to stock if you bricked your Pro unit from the OTA or if your wanting to go back to the stock build.

1) Download the files from the link provided below
2) Run a MD5 checksum to make sure you have no corruption in the file.
* Download fsum from http://www.slavasoft.com/fsum/
* Extract fsum.exe to the folder where the zip file is located
* DOS Prompt- Run: fsum Equiso_Pro_Stock-2013-03-26.zip
* Check sum should match what is below. If not you have a corrupt download.
* Also, as added precaution I've included the individual file checksum in the zip. You can compare that after extracting the file (md5sum.txt)
3) Extract all contents from zip file to root directory of your FAT32 formatted micro sdcard.
4) Insert micro sdcard then power on device.
5) Drink lots of beer and wait as the process is fairly long.
6) If you brick your device blame yourself not me. Im just relaying the info. Use at your own risk.

==MD5 CheckSum==
311b4d697bb521ecdf9d58b723637020 *Equiso_Pro_Stock-2013-03-26.zip

c0114dd0445b7e28fc2934b767365840 *partition_config
398766593587359df0d33608e8dc8490 *product_config.txt
2de9cdb6848d2c24d2f663bc56f85d72 *TF.ROM
756679e159132bc9073101a30d80c952 *uImage_tf

==File Shares==
File name: Equiso_Pro_Stock-2013-03-26.zip (186MB)

File name: Equiso_Pro_Stock-2013-03-26.zip (186MB)

What should we see on the screen during update? Equiso logo? Black screen? A progress bar of some kind?

I followed your guide and I let my device on for hours and nothing happened... Depending on the sdcard sometimes a black screen is shown other times the equiso logo but nothing happens... When I reboot my device is still bricked ...
Same issue here, equiso boots up normally, no update takes place.


Anyone have any luck in loading the stock FW?
Pages: 1 2 3
Reference URL's